4 CPC Webinar on February 18, 2022

Current Status
Not Enrolled
69 - $138
Get Started

Friday, February 18, 2022
9AM – 1PM

 NJSPE Member Rate – $69

Non-Member Rate – $138

Offering 4 CPC credits forNJ Professional Engineers and PE’s in other states that accept NJSPE accredited programs.
NJSPE is a New York State Education Department Approved Sponsors of Continuing Education for Engineers and Land Surveyors. 1 CPC credit equals 1 PDH credit for NYS

Questions: cgoldstein@njpsi.com; 609-393-0099

First UHPC Bridge Deck Overlay on a Major Suspension Bridge in the United States

Michael McDonagh, P.E., P.Eng. and Jordy Padilla, P.E.
Accreditation: 1 Credit Hour

In 2018, the Delaware River and Bay Authority determined that the deck of the first structure was near the end of its service life. Through a 50-year lifecycle cost analysis, a partial-depth deck replacement overlay utilizing Ultra High- Performance Concrete (UHPC) was identified as the preferred alternative to deck replacement and conventional overlays. The pilot project replaced the top 3.75 inches of the deck with UHPC on approximately 25,000 square feet of deck, incorporating overlays on the main suspension bridge, deck truss and steel girder approach structures. The completion of this project set new milestones in the U.S. as the largest use and continuous pour of UHPC overlay.

An Introduction to Physical Asset Management

Justin Furch, Technology Practice Leader
Accreditation: 1 Credit Hour

Physical asset management, which differs from financial or software asset management, is an important and often complicated topic to most organizations. Focusing on increased efficiency and transparency, a well-defined asset management system will provide an organization with their current condition and valuation to support these needs, as well as provide a foundation for budget planning and goal setting. Asset management is one of the first steps in developing risk assessments and resiliency. It can be incorporated into every part of an organizations’ operations and will provide immediate value when fully adopted. This presentation will cover the basic components of asset management, what it provides, why it is so important, and how to get started.

Professional Engineering Ethics 101

Lawrence P. Powers, Co-Chair – Construction Law Department Hoagland, Longo, Moran, Dunst & Doukas, LLP
Accreditation: 2 Credit Hours

The learning objective is to expose the seminar participants to various engineering related professional and statutory codes of ethics to indoctrinate ethics awareness and an understanding of ethical standards common to all jurisdictions, including those of the participants, so that the participants understand the boundaries of ethical engineering behavior.

The program is broken into several parts. Introduction to common statutory and regulatory ethics rules; review of the National Society of Professional Engineers Code of Ethics with examples of common ethics rules, illustrative case studies to consider, with emphasis on the similarities and difference between governmental and professional society sanctions; practical reasons for ethical practice, how unethical practice can present professional liability, legal, licensure, moral and public health, safety and welfare issues.


Michael McDonagh, P.E., P.Eng

Michael McDonagh is Vice President, Engineering & Projects, of Steelike, Inc. Prior to joining Steelike in early 2021, Michael worked for over 24 years as a bridge design engineer. He is an expert on UHPC, a revolutionary construction material that can dramatically improve the service life of structures and lead to more optimized structures, having started working with it in 2008. He has been assisting the Federal Highway Administration since 2016 to promote UHPC, help write design guidance, and review FHWA- created design guidance. He is also a member of the organizing committee of the International Interactive Symposium on UHPC. Michael’s bridge design experience includes bridges located in Canada, France, the United Arab Emirates, and across the U.S., with a wide variety of bridges including multiple signature footbridges. Michael received his BS and MS in Civil Engineering from Penn State University.

Jordy Padilla, P.E.

Jordy Padilla is a structural engineer with WSP, experienced in bridge design, rehabilitation, and construction. Jordy has been involved in several structures utilizing UHPC for bridge preservation as well as the development of new structures. He has assisted the Federal Highway Administration since 2020 to promote UHPC, support with technical guidelines, and most recently, with presenting to several state agencies on UHPC bridge preservation strategies. Jordy has been part of the ASCE Central Jersey branch for the past 5 years serving in a variety of positions, including most recently as the president of the branch. Jordy is also a Board member of the Professional Engineers Society of Mercer County (PESMC) and former Board Chair of the Connecticut Students for a Dream. He is a graduate of the University of New Haven (BS) and Rutgers University (MS).

Justin Furch

Justin Furch is the Technology Practice Leader for T&M and has more than 20 years of extensive experience with asset management, data analysis, software engineering, database development and administration, and system engineering. He has built and led teams that have managed multi-million-dollar technology projects for federal, state, and local agencies. He has worked with agencies such as the New Jersey Department of Transportation, the NY&NJ Port Authority, Pennsylvania Turnpike, and others on populating and managing asset management systems.  Justin also has extensive experience working with Geographical Information System (GIS) software, transportation data modeling, and design and development of custom software solutions. These include transportation asset management systems, project tracking and management systems, field inspection and inventory, and analysis/reporting systems.

Lawrence P. Powers

Lawrence P. Powers, is Partner and co-chair of the Construction Litigation Department at Hoagland, Longo, Moran, Dunst & Doukas, LLP. Larry’s practice is focused on handling complex, multi-party construction related professional liability claims. He has tried numerous complex construction cases to a jury verdict. Admitted in 1984, he has over 35 years of experience in litigating, arbitrating and mediating construction disputes, regularly handling difficult loss prevention and risk management assignments for all of the major professional liability insurers. Larry serves as general counsel to AIA-New Jersey, the New Jersey Society of Professional Engineers and ASLA-New Jersey. He regularly represents design professionals in disciplinary matters before the New Jersey State Board of Architects and Landscape Architects and the New Jersey State Board of Engineers and Land Surveyors. Mr. Powers has achieved a peer review rating of “AV”, the highest mark given by other members of the legal profession. He is admitted to practice in the state and federal courts of New Jersey. He was named “Lawyer of the Year 2012” in the Construction Litigation category by Best Lawyers® for the Woodbridge, NJ Metropolitan area in 2012 and 2018 as well as Construction Law category in 2017.

CE Webinar Opportunities

Ready to Join?

Get Started